HP PhotoSmart R707/R707v/R707xiDigital Camera Firmware Automatic 2.00.23.

This is an automatic firmware updater which requires the camera be set to Digital Camera mode in the USB setup menu and the HP Image Zone software be installed on your Windows PC.

If do not have the HP Image Zone software loaded, and would prefer not to load it, you should instead download the manual firmware update, col6942.exe.

However, it is important to note that an SD memory card is REQUIRED for the manual firmware update procedure.

A memory card is not required to run the automatic firmware update software.

Before downloading this update, you should check the current firmware revision of your camera.

To check the firmware revision, hold down the flash button while turning on the camera.

If the firmware revision number is less than 2.00.23 (for example: 2.00.19, 2.00.14, or 2.00.11 or earlier), you should install this update.

Version 2.00.23 firmware includes the following fixes:

• Improves TV display quality in slide show mode
• Fixes an issue with camera displaying "Bad data access address" error when transferring image to a PC/Mac.
• Card corruption issue when saved images can not be viewed, transferred, or copied to PC.

After you have finished downloading the file, locate the download (COL7429.EXE) and double-click it.

This will extract the files needed for the firmware update into a c:col7429 folder and the Automatic Updater (hpFirmwareUpdateTool.exe) should launch automatically.

Please closely follow any and all directions in the Automatic Updater or the firmware update will fail. You can run the updater more than once, however, until the firmware is updated.